Nickel Alloy Tubes Suppliers

Nickel Alloy Tubes are used extensively in applications where heat resistance and/or corrosion resistance is required. Nickel Alloy Tubes in this class are designed to resist failure from both of these mechanisms. Nickel alloy Tubes are not suitable for high temperature sulphur rich environments.This nickel alloy tubes are frequently sold under trade name specifications but most are listed in the Unified Numbering System. Common trade names are HASTELLOY, INCOLOY, INCONEL, NICROFER, NICROM and NIMONIC.
Nickel alloys Tubes have higher strength and longer life at elevated temperature than most alloys. The designer however, must determine the expected life of each component and use the appropriate creep and rupture strength in the design before selecting Tubes.

Nickel Alloy Tubes

E mail to Javico Industries for Nickel Alloy Tubes


Nickel Alloy Tubes are used in many applications where they are subjected to harsh environments at high temperatures. Nickel alloys Tubes offer excellent corrosion resistance to a wide range of corrosive media. However, as with all types of corrosion, many factors influence the rate of attack. Nickel alloy Tubes found to have a profound effect on the thermal expansion of iron.


Nickel Alloy Tubes Technical Standards






Some high-temperature variants include:

  • Nickel Alloy 601 Tubes - Lower nickel (61%) content with aluminum and silicon additions for improved oxidation and nitriding resistance.
  • Nickel Alloy X750 Tubes - Aluminum and titanium additions for age hardening
  • Nickel Alloy 718 Tubes -Titanium and niobium additions to overcome strainage cracking problems during welding and weld repair
  • Nickel Alloy X (48Ni-22Cr-18Fe-9Mo + W) Tubes -High-temperature flat-rolled product for aerospace applications
  • Nickel Waspaloy (60Ni-19Cr-4Mo-3Ti-1.3Al) Tubes - Proprietary alloy for jet engine applications
    Some corrosion-resistant variants in the Ni-Cr-Fe system include.
  • Nickel Alloy 625 Tubes - The addition of 9% Mo plus 3% Nb offers both high-temperature and wet corrosion resistance; resists pitting and crevice corrosion.
  • Nickel Alloy G3/G30 (Ni-22Cr-19Fe-7Mo-2Cu) Tubes -The increased molybdenum content in these alloys offers improved pitting and crevice corrosion resistance.
  • Nickel Alloy C-22 (Ni-22Cr-6Fe-14Mo-4W) Tubes -Superior corrosion resistance in oxidizing acid chlorides, wet chlorine, and other severe corrosive environments.
  • Nickel Alloy C-276 (17% Mo plus 3.7W) Tubes -Good seawater corrosion resistance and excellent pitting and crevice corrosion resistance.
  • Nickel Alloy 690 (27% Cr addition) Tubes -Excellent oxidation and nitric acid resistance; specified for nuclear waste disposal by the vitreous encapsulation method.

    Iron-Nickel-Chromium Alloys Tubes. This series of alloy Tubes has also found extensive use in the high-temperature petrochemical environments, where sulfur-containing feedstocks (naphtha and heavy oils) are cracked into component distillate parts. Not only were these Tubes resistant to chloride-ion stress-corrosion cracking, but they also offered resistance to polythionic acid cracking. Some alloys of commercial importance include:
  • Nickel Alloy 800 (Fe-32Ni-21Cr) Tubes -The basic alloy in the Fe-Ni-Cr system; resistant to oxidation and carburization at elevated temperatures.
  • Nickel Alloy 800HT Tubes -Similar to 800H with further modification to combined titanium and aluminum levels (0.85 to 1.2%) to ensure optimum high-temperature properties.
  • Nickel Alloy 801 Tubes -Increased titanium content (0.75 to 1.5%); exceptional resistance to polythionic acid cracking.
  • Nickel Alloy 802 Tubes -High-carbon version (0.2 to 0.5%) for improved strength at high temperatures.
  • Nickel Alloy 825 (Fe-42Ni-21.5Cr-2Cu) Tubes -Stabilized with titanium addition (0.6 to 1.2%). Also contains molybdenum (3%) for pitting resistance in aqueous corrosion applications. Copper content bestows resistance to sulfuric acid.
  • Nickel Alloy 925 Tubes -Addition of titanium and aluminum to 825 composition for strengthening through age hardening.

Nickel Alloy Tubes key characteristics are:

  • Nickel Alloy Tubes melting point, 1453 ºC
  • Resists corrosion and oxidation
  • Nickel Alloy Tubes are very ductile
  • Nickel Alloy Tubes alloys readily
  • Magnetic at room temperature
  • Can be deposited by electroplating
  • Nickel Alloy Tubes has catalytic properties


Applications of Nickel Alloy Tubes

Nickel and nickel alloys are used for a wide variety of applications, the majority of which involve corrosion resistance and/or heat resistance. Some of these include:
• Aircraft gas turbines
• Steam turbine power plants
• Medical applications
• Nuclear power systems
• Chemical and petrochemical industries

A number of other applications for nickel alloy Tubes involve the unique physical properties of special-purpose nickel-base or high-nickel alloys. These include:
• Low-expansion alloys
• Electrical resistance alloys
• Soft magnetic alloys
• Shape memory alloys

Chemical Symbol: Ni
Atomic Number: 28
Atomic Weight: 58.71
Melting Point: 1453 ºC
Boiling Point: 2730 ºC
Density: 8.90 g/cm3 at 25 ºC
Curie Temperature: 253 ºC


Nickel Alloy Tubes

Inspection and Certifications

We accept order for nickel alloy tubes with third party inspection if asked by the customer to make suite that the end user gets complete satisfaction and be assured about the authenticity of the tubes supplied with respective order.

We are so precise in our quality and confident about our Quality Nickel alloy Tubes that we can offer our it with any world known third party inspection and certifications.

manufacturers and suppliers of Nickel alloy Tubes with Lloyds third party inspection service and certifications
manufacturers and suppliers of Nickel alloy Tubes with SGS third party inspection service and certifications
manufacturers and suppliers of Nickel alloy Tubes with BVQI third party inspection service and certifications
manufacturers and suppliers of Nickel alloy Tubes with Indian registrar of Shipping third party inspection service and certifications
manufacturers and suppliers of Nickel alloy Tubes with DNV third party inspection service and certifications



Apart from third party inspection and certification of Nickel alloy Tubes which is totally optional to the customer, all these Nickel Alloy Tubes are offered with a NACE 3.1 or 3.2 Mill Test Certification. Positive Material Identification (PMI) is done on all raw material procured by us, irrelevant to quantity and source of our supply.


Nickel Alloy Tubes - Marking and Grade Identification

All Nickel Alloy Tubes are having marking with alloy name, Standard, Size, Thickness and Heat Number.



Nickel Alloy Tubes


All nickel alloy tubes are packed as per international standards and we make sure that the consignment reach to the final destination intact.



Nickel Alloy Tubes Common Names

Choose from a wide range of grades and sizes, the best suitable for your project.


Nickel Alloy Tubes Manufacturers and Suppliers


We Welcomes Distributors for Nickel alloy Tubes




Trade Names and Owners of Nickel Alloys
HASTELLOY is a registered trade name of Haynes Intl.
INCOLOY, INCONEL, MONEL and NIMONIC are registered trade names of the INCO family of companies.
INVAR is a registered trademark of Imphy S.A.
MU-METAL is a registered trademark of Telcon Metals Ltd
NICORROS and NICROFER are registered tradenames of Krupp UM GmbH