Nickel alloy Round Bars are used extensively in applications
where heat resistance and/or corrosion resistance is required. Nickel
Alloy Round Bars Manufacturers and Suppliers in this class are designed to resist failure from
both of these mechanisms. Nickel alloy Round Bars are not suitable
for high temperature sulphur rich environments.This Nickel
Alloy Round Bars are frequently sold under trade name specifications
but most are listed in the Unified Numbering System. Common trade
names are HASTELLOY, INCOLOY, INCONEL, NICROFER, NICROM and NIMONIC. Nickel Alloys Round Bars have higher strength and
longer life at elevated temperature than most alloys. The designer
however, must determine the expected life of each component and use
the appropriate creep and rupture strength in the design before selecting
Round Bars.
Nickel Alloy Round Bars are used
in many applications where they are subjected to harsh environments
at high temperatures. Nickel alloys Round Bars offer excellent corrosion
resistance to a wide range of corrosive media. However, as with all
types of corrosion, many factors influence the rate of attack. Nickel
alloy Round Bars found to have a profound effect on the thermal
expansion of iron.
Some high-temperature variants include:
Nickel Alloy 601 Round Bars - Lower nickel (61%) content with aluminum
and silicon additions for improved oxidation and nitriding resistance.
Nickel Alloy X750 Round Bars - Aluminum and titanium additions for
age hardening
Nickel Alloy 718 Round Bars -Titanium and niobium additions to overcome
strainage cracking problems during welding and weld repair
Nickel Alloy X (48Ni-22Cr-18Fe-9Mo + W) Round Bars -High-temperature
flat-rolled product for aerospace applications
Nickel Waspaloy (60Ni-19Cr-4Mo-3Ti-1.3Al) Round Bars - Proprietary
alloy for jet engine applications
Some corrosion-resistant variants in the Ni-Cr-Fe system include.
Nickel Alloy 625 Round Bars - The addition of 9% Mo plus 3% Nb offers
both high-temperature and wet corrosion resistance; resists pitting
and crevice corrosion.
Nickel Alloy G3/G30 (Ni-22Cr-19Fe-7Mo-2Cu) Round Bars -The increased
molybdenum content in these alloys offers improved pitting and crevice
corrosion resistance.
Nickel Alloy C-22 (Ni-22Cr-6Fe-14Mo-4W) Round Bars -Superior corrosion
resistance in oxidizing acid chlorides, wet chlorine, and other
severe corrosive environments.
Nickel Alloy C-276 (17% Mo plus 3.7W) Round Bars -Good seawater corrosion
resistance and excellent pitting and crevice corrosion resistance.
Nickel Alloy 690 (27% Cr addition) Round Bars -Excellent
oxidation and nitric acid resistance; specified for nuclear waste
disposal by the vitreous encapsulation method.
Iron-Nickel-Chromium Alloys Round Bars. This series of alloy Round Bars
has also found extensive use in the high-temperature petrochemical
environments, where sulfur-containing feedstocks (naphtha and
heavy oils) are cracked into component distillate parts. Not only
were these Round Bars resistant to chloride-ion stress-corrosion cracking,
but they also offered resistance to polythionic acid cracking.
Some alloys of commercial importance include:
Nickel Alloy 800 (Fe-32Ni-21Cr) Round Bars -The basic alloy in the
Fe-Ni-Cr system; resistant to oxidation and carburization at elevated
temperatures.
Nickel Alloy 800HT Round Bars -Similar to 800H with further modification
to combined titanium and aluminum levels (0.85 to 1.2%) to ensure
optimum high-temperature properties.
Nickel Alloy 801 Round Bars -Increased titanium content (0.75 to 1.5%);
exceptional resistance to polythionic acid cracking.
Nickel Alloy 802 Round Bars -High-carbon version (0.2 to 0.5%) for
improved strength at high temperatures.
Nickel Alloy 825 (Fe-42Ni-21.5Cr-2Cu) Round Bars -Stabilized with
titanium addition (0.6 to 1.2%). Also contains molybdenum (3%) for
pitting resistance in aqueous corrosion applications. Copper content
bestows resistance to sulfuric acid.
Nickel Alloy 925 Round Bars -Addition of titanium and aluminum to
825 composition for strengthening through age hardening.
Nickel Alloy Round Bars Key Characteristics are:
Nickel Alloy Round Bars melting point, 1453 ºC
Resists corrosion and oxidation
Nickel Alloy Round Bars are very ductile
Nickel Alloy Round Bars alloys readily
Magnetic at room temperature
Can be deposited by electroplating
Nickel Alloy Round Bars has catalytic properties
Nickel Alloy Round Bars Applications
Nickel and nickel alloys are used for a wide variety of applications,
the majority of which involve corrosion resistance and/or heat resistance.
Some of these include:
• Aircraft gas turbines
• Steam turbine power plants
• Medical applications
• Nuclear power systems
• Chemical and petrochemical industries
A number of other applications for nickel Alloy Round Bars Manufacturers and Suppliers involve the
unique physical properties of special-purpose nickel-base or high-nickel
alloys. These include:
• Low-expansion alloys
• Electrical resistance alloys
• Soft magnetic alloys
• Shape memory alloys
Name: NICKEL
Chemical Symbol: Ni
Atomic Number: 28
Atomic Weight: 58.71
Melting Point: 1453 ºC
Boiling Point: 2730 ºC
Density: 8.90 g/cm3 at 25 ºC
Curie Temperature: 253 ºC
We are so precise in our quality and confident about our Quality
Nickel alloy Round Bars that we can offer our it with any world known
third party inspection and certifications.
Lloyds
SGS
BVQI
IRS
DNV
Marking on Nickel Alloy Round Bars
All Nickel Alloy Round Bars are having marking with alloy name, Standard,
Size, pressure class and heat number.
Nickel alloy Round Bars Manufacturers and Suppliers
We Welcomes Distributors for Nickel alloy Round Bars
All these Nickel Alloy Round Bars are offered with a NACE 3.1 or 3.2
Mill Test Certification. Positive Material Identification (PMI) is
done on all raw material procured by us, irrelavent to quantity and
source of our supply.
Trade Names and Owners of Nickel Alloys
HASTELLOY is a registered trade name of Haynes Intl.
INCOLOY, INCONEL, MONEL and NIMONIC are registered trade names of
the INCO family of companies.
INVAR is a registered trademark of Imphy S.A.
MU-METAL is a registered trademark of Telcon Metals Ltd
NICORROS and NICROFER are registered tradenames of Krupp UM GmbH
