Nickel Alloy Angles Manufacturers and Suppliers


Nickel alloy angles are used extensively in applications where heat resistance and/or corrosion resistance is required. Nickel Alloy angles in this class are designed to resist failure from both of these mechanisms. Nickel alloy angles are not suitable for high temperature sulphur rich environments.This nickel alloy angles are frequently sold under trade name specifications but most are listed in the Unified Numbering System. Common trade names are HASTELLOY, INCOLOY, INCONEL etc.

Nickel alloys angles have higher strength and longer life at elevated temperature than most alloys. The designer however, must determine the expected life of each component and use the appropriate creep and rupture strength in the design before selecting angles.

Nickel Alloy Equal Angles Nickel Alloy Unequal Angles

E mail to Javico Industries for Nickel Alloy angles

 

Nickel alloy angles are used in many applications where they are subjected to harsh environments at high temperatures. Nickel alloys angles offer excellent corrosion resistance to a wide range of corrosive media. However, as with all types of corrosion, many factors influence the rate of attack. Nickel alloy angles found to have a profound effect on the thermal expansion of iron.

We are manufacturer and Supplier of Nickel Alloy Angles in many different grades, Sizes and legnth specifications. Typically metal Angles are manufactured through rolling process but that is possible with good quantity only and as fas as nickel alloy angles are not required in such a big quantity it can be manufactured with the halp of press bending process wherin plain nickel alloy flat of required size is cutted as per the requirement and threafter bending process is being conducted, Normally weather it is nickel alloy or Duplex Steel Angle or even Stainless Steel Angles requied in special or non standard size or small quantity, this process is vety useful.

 

Nickel Alloy Angles Type :


We can differentiate any metal angle with its material i.e. grade or even its shape yes we are manfacturing these nickel alloy angles in two types i,e, equal angles and unequal angles. Equal Nickel Alloy angles will have both sides equal whereas unequal angles are manufactured as per customer specific size and that is unequal when you compare both sides.

 

Nickel Alloy Angles Thickness and Size availability with us:

 

We are manufacturer and suppliers of nickel alloy angles in a wide range of thickness and sizes to facilitate our customers. we are manufacturing these angles from smallest required length to upto 10 feet long as well as we are accepting order in multiple legnth. We are manufacturing thickness from 0.50mm to 20mm thicness.

 

Some high-temperature variants include:

  • Nickel Alloy 601 angles - Lower nickel (61%) content with aluminum and silicon additions for improved oxidation and nitriding resistance.
  • Nickel Alloy X750 angles - Aluminum and titanium additions for age hardening
  • Nickel Alloy 718 angles -Titanium and niobium additions to overcome strainage cracking problems during welding and weld repair
  • Nickel Alloy X (48Ni-22Cr-18Fe-9Mo + W) angles -High-temperature flat-rolled product for aerospace applications
  • Nickel Waspaloy (60Ni-19Cr-4Mo-3Ti-1.3Al) angles - Proprietary alloy for jet engine applications
    Some corrosion-resistant variants in the Ni-Cr-Fe system include.
  • Nickel Alloy 625 angles - The addition of 9% Mo plus 3% Nb offers both high-temperature and wet corrosion resistance; resists pitting and crevice corrosion.
  • Nickel Alloy G3/G30 (Ni-22Cr-19Fe-7Mo-2Cu) angles -The increased molybdenum content in these alloys offers improved pitting and crevice corrosion resistance.
  • Nickel Alloy C-22 (Ni-22Cr-6Fe-14Mo-4W) angles -Superior corrosion resistance in oxidizing acid chlorides, wet chlorine, and other severe corrosive environments.
  • Nickel Alloy C-276 (17% Mo plus 3.7W) angles -Good seawater corrosion resistance and excellent pitting and crevice corrosion resistance.
  • Nickel Alloy 690 (27% Cr addition) angles -Excellent oxidation and nitric acid resistance; specified for nuclear waste disposal by the vitreous encapsulation method.

    Iron-Nickel-Chromium Alloys angles. This series of alloy angles has also found extensive use in the high-temperature petrochemical environments, where sulfur-containing feedstocks (naphtha and heavy oils) are cracked into component distillate parts. Not only were these angles resistant to chloride-ion stress-corrosion cracking, but they also offered resistance to polythionic acid cracking. Some alloys of commercial importance include:
  • Nickel Alloy 800 (Fe-32Ni-21Cr) angles -The basic alloy in the Fe-Ni-Cr system; resistant to oxidation and carburization at elevated temperatures.
  • Nickel Alloy 800HT angles -Similar to 800H with further modification to combined titanium and aluminum levels (0.85 to 1.2%) to ensure optimum high-temperature properties.
  • Nickel Alloy 801 angles -Increased titanium content (0.75 to 1.5%); exceptional resistance to polythionic acid cracking.
  • Nickel Alloy 802 angles -High-carbon version (0.2 to 0.5%) for improved strength at high temperatures.
  • Nickel Alloy 825 (Fe-42Ni-21.5Cr-2Cu) angles -Stabilized with titanium addition (0.6 to 1.2%). Also contains molybdenum (3%) for pitting resistance in aqueous corrosion applications. Copper content bestows resistance to sulfuric acid.
  • Nickel Alloy 925 angles -Addition of titanium and aluminum to 825 composition for strengthening through age hardening.

Nickel Alloy Angles Key Characteristics:


  • Nickel Alloy angles melting point, 1453 ºC
  • Nickel Alloy angles Resists corrosion and oxidation
  • Nickel Alloy angles are very ductile
  • Nickel Alloy angles alloys readily
  • Magnetic at room temperature
  • Can be deposited by electroplating
  • Nickel Alloy angles has catalytic properties

 

Nickel Alloy Angles Applications


Nickel alloys angles are used for a wide variety of applications, the majority of which involve corrosion resistance and/or heat resistance. Some of these include:
• Aircraft gas turbines
• Steam turbine power plants
• Hazardus Chemical Industry
• Nuclear power systems
• Chemical and petrochemical industries

A number of other applications for nickel alloy angles involve the unique physical properties of special-purpose nickel-base or high-nickel alloys. These include:
• Low-expansion alloys
• Electrical resistance alloys
• Soft magnetic alloys
• Shape memory alloys

Name: NICKEL Alloy Angel
Chemical Symbol: Ni
Atomic Number: 28
Atomic Weight: 58.71
Melting Point: 1453 ºC
Boiling Point: 2730 ºC
Density: 8.90 g/cm3 at 25 ºC
Curie Temperature: 253 ºC

We are so precise in our quality and confident about our Quality Nickel alloy angles that we can offer our it with any world known third party inspection and certifications.

manufacturers and suppliers of Nickel alloy angles with Lloyds third party inspection service and certifications
manufacturers and suppliers of Nickel alloy angles with SGS third party inspection service and certifications
manufacturers and suppliers of Nickel alloy angles with BVQI third party inspection service and certifications
manufacturers and suppliers of Nickel alloy angles with Indian registrar of Shipping third party inspection service and certifications
manufacturers and suppliers of Nickel alloy angles with DNV third party inspection service and certifications
Lloyds
SGS
BVQI
IRS

DNV

 

Marking on Nickel Alloy Angles
All Nickel Alloy Angles are having marking with alloy name, Standard, Size and heat number.

 

Nickel Alloy Angles Manufacturers and Suppliers

 

We Welcomes Distributors for Nickel alloy angles

 

All these Nickel Alloy angles are offered with a NACE 3.1 or 3.2 Mill Test Certification. Positive Material Identification (PMI) is done on all raw material procured by us, irrelavent to quantity and source of our supply.

 

Trade Names and Owners of Nickel Alloys

HASTELLOY is a registered trade name of Haynes Intl.
INCOLOY, INCONEL, MONEL and NIMONIC are registered trade names of the INCO family of companies.
INVAR is a registered trademark of Imphy S.A.
MU-METAL is a registered trademark of Telcon Metals Ltd
NICORROS and NICROFER are registered tradenames of Krupp UM GmbH

 

Please note that all the information provided on this site is only for referene purpose and do not hold for any responsibility or claim in any manner.