Copper Nickel Alloys 706 / C706 / C70600 (90/10) Butt Weld Pipe Fittings

 

C 70600 Copper Nickel Alloys Butt Weld Pipe FittingsC70600 Copper Nickel Alloy Butt Weld Pipe Fittings enhanced by latest advance technologies and keen workforce ability, we are in a position to be the best to manufacturers and suppliers. We are the most prominent source of supply for world class quality 90/10 Copper Nickel Butt Weld Pipe Fittings in India. Copper Nickel alloy C706 pipe fittings are also known as Copper Nickel 90/10 because it is made up of 10% nickel.

E mail to Javico Industries for Cupro Nickel (70/30) Alloy C 70600 butt weld pipe fittings

 

C706 pipe fittings known for its moderate strength, weldability, and formability. The inclusion of controlled quantities of iron and manganese also give the 90/10 alloy pipe fittings an extraordinary resistance to general corrosion and stress cracking, as well as to erosion and impingement due to turbulent water containing air bubbles and silt flowing at high velocities.

We are manufacturing size range from 1/2" NB to 36" NB Copper Nickel Alloy butt weld pipe fittings in all forms. C706 (90-10) Copper Nickel Alloy Butt Weld Pipe Fittings are preferred to 90-10 butt weld pipe fittings where corrosion and temperature conditions are more severe. C 70600 Copper Nickel 10% Alloy butt weld pipe fittings offers excellent corrosion resistance, stress corrosion cracking resistance moderately, high strength and last but not least good creep resistance at elevated temperatures. Copper nickel C70600 alloy butt weld pipe fittings contains 10% nickel and is best suitable copper alloy butt weld pipe fittings for applications in areas of high temperatures and pressures combined with high velocity and turbulence is matter of concern.

 

These Copper Nickel butt weld pipe fittings are being manufactured in line with the set industrial standards using qualitative raw materials inputs which are source from authentic and verified mills of the domain. Our 90/10 Copper Nickel butt weld pipe fittings are uniform in construction and dimensionally accurate enjoy the feature of corrosion resistant and off course easy to install and maintenance free. We can manufacture and supply these C 70600 copper nickel butt weld pipe fittings in all different technical standards and specifications, these Cu-Ni butt weld pipe fittings can also be manufactured and customized as per the customer's specifications at very reasonable prices as well.

We have a vast experience for supplying and exporting C706 Copper Nickel butt weld pipe fittings with best suitable export worthy packing for all valued orders.

 

C 70600 Copper Nickel Alloy Butt Weld Fittings Size Range

 

From - 1/2 NB to 36" NPS

 

C70600 Copper Nickel Alloys Butt Weld Fittings Dimensional Information:

 

We are manufacturing these C70600 Copper Nickel Alloys Butt Weld Fittings as per many international dimensional standards like :

  • ASME standard C70600 Copper Nickel Alloys Butt Weld Fittings
  • DIN standard C70600 Copper Nickel Alloys Butt Weld Fittings
  • BS standard C70600 Copper Nickel Alloys Butt Weld Fittings
  • JIS standard C70600 Copper Nickel Alloys Butt Weld Fittings

 

C70600 Copper Nickel Alloys Butt Weld Fittings Technical Information:

 

We are manufacturing these C70600 Copper Nickel Alloys Butt Weld Fittings as per many international dimensional standards like :

  • ASTM B 366 standard C70600 Copper Nickel Alloys Butt Weld Fittings
  • ASTM B 564 standard C70600 Copper Nickel Alloys Butt Weld Fittings

 

C70600 Copper Nickel Alloys Butt Weld Fittings ASME Standard Information:

 

We are manufacturing these C70600 Copper Nickel Alloys Butt Weld Fittings as per many international dimensional standards like :

  • ASME B16.11 standard C70600 Copper Nickel Alloys Butt Weld Fittings

 

Industrial Applications of C70600 Copper Nickel Butt Weld Pipe Fittings


C70600 Copper Nickel 30% Alloy butt weld pipe fittings are typically used for manufacturing condensers, boilers, condensers, process equipment, refrigerators, propeller sleeves, ferrules, heat exchanger tubes, evaporator tubes, distiller tubes being widely used in sea water service, sea water condensers, salt water pipe lines, salt water applications, salt water piping and internal parts for sea water applications and fittings.

 

Types of C 70600 Copper Nickel Alloy Butt Weld Pipe Fittings

 

Copper Nickel C70600 Alloy Seamless butt welding fittings
Seamless Cu-Ni C706 butt welding pipe fittings are manufactured by seamless pipes or tubes and by either a hot forming process or the cold forming. Seamless butt welding fittings are available in standard sizes, as published in the relevant product tables, and in non-standard sizes. Standard size fittings are being manufactured more frequently.

.
C70600 Copper Nickel Alloy Seam-welded butt weld fittings
Seam-welded butt welding fittings in C706 Copper Nickel Alloy are manufactured from ho trolled, annealed and pickled sheet or flats, formed into half shells or segments and longitudinally seam-welded. Seam-welded butt welding fittings are available in standard sizes, as published in the relevant butt weld fittings tables, and in non-standard sizes. Standard size fittings are generally being manufactured more frequently.

 

1. C 70600 Copper Nickel Alloy Butt weld Fittings - 90° Long Radius Elbow

C715 Cu-Ni 90° Elbow function is to change direction or flow of pipe line in a piping system to a particular 90 degree angle. There are many options by default available in C706 Cu-Ni elbows and one of it is 90° Long radius elbows. C 70600 Copper Nickel Elbows for pipes up to and including 368 mm in size are manufactured and supplied seamless and Elbows for larger diameter pipes are made from half shells, longitudinally welded. 90° elbows are available in all sizes.

 

2.C70600 Copper Nickel Alloy Butt weld Pipe Fittings - 45° Elbow

The function of a 45° C 70600 Copper Nickel elbow is exactly the same as what of a 90° elbow, but the measurement of dimensions is different to that of the 90° C706 Copper Nickel elbow. We manufacturing these elbows in various radius like 3D, 5D, 6D, 8D, 10D and drawing based elbow (customized)

 

3. C 70600 Copper Nickel Alloy Butt weld Fittings - 90° short radius Elbow.

By default, there are 5 opportunities in the C 706 Copper Nickel elbows and one of them is "short radius" version. We manufacturing these 90° short radius Elbow in various radius like 3D, 5D, 6D, 8D, 10D, and 20D in 90 degree and drawing based (customized).

 

4. C 70600 Copper Nickel Alloy Butt weld Pipe Fittings - Long Radius 180° Elbow

C 706 Copper Nickel 180 degree long radius elbows center to face distance is comparatively longer than what it is of short radius elbows with 180 degree short radius. We manufacturing these Long Radius 180° Elbow in various radius like 3D, 5D, 6D, 8D, 10D, and 20D in 90 degree and drawing based (customized).

 

5. C 70600 Copper Nickel Alloy Butt weld Fittings - 180° Short Radius Elbow

These C 706 Copper Nickel elbow are performing same function as what 180 degree long radius elbows do but the radius that is center to face is comparatively shorter to long radius elbows. We manufacturing these C706 Copper Nickel Alloy 180° Elbow in various radius like 3D, 5D, 6D, 8D, 10D, and 20D in 90 degree and drawing based (customized).

 

6.C 70600 Copper Nickel Alloy Butt weld Pipe Fittings - Straight Tee

The purpose of C 70600 Copper Nickel Tee is to make a 90° branch connection from the main run of pipe. There are two options available with engineers about C706 Copper Nickel alloy tee and one of it is straight tee. These straight tee are also called as C 70600 Copper Nickel equal tee. These C 70600 Copper Nickel straight or equal tees are used as the branch and has the same diameter of it;s branch as what of the run-pipe.

 

7. C 70600 Copper Nickel Alloy Butt weld Fittings - Tee reducing

As we already know that C 70600 Copper Nickel tee have been designed to make 90 degree branch connection from the main run pipe. The second option with engineers is C 70600 Copper Nickel reducing tee. These C706 Copper Nickel unequal tee (reducing tee) are functionally same as what of straight tee but here the only difference is it;s branch connection, which is lesser than running pipe diameter.

 

8. C 70600 Copper Nickel Alloy Butt weld Pipe Fittings - Concentric Reducer

Reducers in C 70600 Copper Nickel butt weld pipe fittings are been applied to change the size of running pipe diameter to higher size or lower size in one direction. There are two standard available, one of these two is the C 70600 Copper Nickel concentric reducers., These reducers are used in vertical C 70600 Copper Nickel pipe line.

 

9. C 70600 Copper Nickel Alloy Butt weld Fittings - Eccentric Reducer

C 70600 Copper Nickel eccentric reducers function is same as what of concentric reducers the only difference in this eccentric reducers is used in horizontal pipe lines and not in vertical pipe lines like what concentric reducers are being used in.

 

10. C 70600 Copper Nickel Alloy Butt weld Pipe Fittings - End cap

C 70600 Copper Nickel cap will be applied to shut down or to closing the end of a running pipe. The Cap as shown in the image is manufactured , supplied and exported by us for all pipe size range. These end caps can be as bigger as two meter diameter i.e. 2000 mm and being sometimes used for other than pipe line purpose also.

 

11. C 70600 Copper Nickel Alloy Butt weld Fittings - Lap joint Stub End

C 70600 Copper Nickel Stub Ends are used with Lap Joint flange, as a backing flange.This C 70600 Copper Nickel flange connections are applied only in low-pressure applications and non critical applications, and is also a cheap method of flanging as well. .For example in a stainless steel pipe line system a carbon steel flange can be used, because they are not getting in contact with the transit materials in the pipe line.

 

12. C 70600 Copper Nickel Alloy Butt weld Pipe Fittings - Straight Cross

C 70600 Copper Nickel cross is a kind of tee but with extra function. In C 70600 Copper Nickel tee it make a 90 degree branch connection from the main run of pipe but with these C 70600 Copper Nickel cross we can have three connections at a time. There are two options available in cross and one out of these two options is C 70600 Copper Nickel strafing or equal cross.

 

13. C 70600 Copper Nickel Alloy Butt weld Pipe Fittings - Reducing Cross

The second option is C 70600 Copper Nickel unequal cross is unequal cross i.e. reducing cross. The function of these C706 Copper Nickel cross is same as what of straight cross, the only difference is the option of branch connections. In these type of cross the branch connection size differed from the running pipe size diameter.


C70600 Copper Nickel Alloy Butt Weld Pipe Fittings Technical Standards :-

 

  • ASTM B 111 C 70600 standard Copper Nickel Alloy butt weld pipe fittings
  • ASME SB 111 C 70600 standard Copper Nickel Alloy butt weld pipe fittings
  • BS 2871 part 3 CN 107 standard Copper Nickel Alloy butt weld pipe fittings
  • EN 12451 Cu Ni 30 Fe 1 Mn standard Copper Nickel Alloy butt weld pipe fittings
  • NFA 51 102 Cu Ni 30 Fe 1 Mn standard Copper Nickel Alloy butt weld pipe fittings
  • JIS H 3300 C 7150 standard Copper Nickel Alloy butt weld pipe fittings

 

Fabrication of Copper Nickel C70600 Alloy Butt Weld Fittings

Joining Method
Suitability
Brazing
Excellent
Capacity for Being Cold Worked
Good
Capacity for Being Hot Formed Good
Coated Metal Arc Welding Excellent
Gas Shielded Arc Welding Excellent
Machined Rating 20
Oxyacetylene Welding Good
Soldering Excellent
Spot Weld Excellent

 

 

Chemical Composition of Alloy C70600 Copper Nickel Butt Weld Pipe Fittings

 

Elements
Alloy C70600 Copper Nickel butt weld pipe fittings
Iron 0.4 to 1.0%
Manganese 0.5 to 1.5%
Nickel 30 to 32%
Copper Balance
Total Imp. 0.30% max.

 

 

Physical Properties of Alloy C70600 Copper Nickel Butt Welding Pipe Fittings

Elements
T.S. Kg/mm2
EL% Min
T.S. Kg/mm2
EL% Min
Annealed (O)
35
35 %
37.5-46
30%

 

 

C70600 Copper Nickel Alloys Butt Weld Fittings Price Information :

 

We are proud to establish ourselves amongst the leaders of market as C70600 Copper Nickel Alloys Butt Weld Fittings Manufacturer and Suppliers . C70600 Copper Nickel Alloys Butt Weld Fittings available with us provided at reasonable prices with no quality compromise ensures optimum level of customer satisfaction.

 

Applicable tests on Cu- Ni Alloy C 70600 Butt Welding Pipe Fittings

  • Drift Test
  • Hydraulic Test
  • Microstructure
  • Eddy Current Optional

 

We are so precise in our quality and confident about our Butt Weld Pipe Fittings that we can offer our product with any world known third party inspection and certifications.

manufacturers and suppliers of Copper 
            Nickel Alloys C70600 Butt Weld Pipe Fittings with Lloyds third party inspection service and certifications
manufacturers and suppliers of Copper 
            Nickel Alloys C70600 Butt Weld Pipe Fittings with SGS third party inspection service and certifications
manufacturers and suppliers of Copper 
            Nickel Alloys C70600 Butt Weld Pipe Fittings with BVQI third party inspection service and certifications
manufacturers and suppliers of Copper 
            Nickel Alloys C70600 Butt Weld Pipe Fittings with Indian registrar of Shipping third party inspection service and certifications
manufacturers and suppliers of Copper 
            Nickel Alloys C70600 Butt Weld Pipe Fittings with DNV third party inspection service and certifications
Lloyds
SGS
BVQI
IRS

DNV

 

 

C70600 Copper Nickel Alloy Butt Weld Pipe Fittings :

Inspection Check Points:

There are certain points where bolts have to be inspected to make ensure that the best quality is believer to customer.

  • Dimensions
  • Burr free edges.
  • Crack Free

 

C70600 Copper Nickel Alloy Butt Weld Pipe Fittings manufacturers Test Procedure :

 

All our C70600 Copper Nickel Alloy Butt Weld Pipe Fittings are 100% carefully inspected through series of dedicate testing procedures, including:

  • Material verification of C70600 Copper Nickel Alloy
  • Dimension check such as tolerance, lobing, out-of-roundness
  • Crack and Burr Free Edges etc.
  • Final Mechanical Properties of C70600 Copper Nickel Alloy Butt Weld Pipe Fittings .
  • Overall quality inspection (Includes eddy current (non-destructive) electric testing.)
 
Copper Nickel Alloy Butt Welding Pipe Fittings Marking :-


All C706 Copper Nickel Butt Weld Pipe Fittings are marked with alloy name, Size, Schedule or thickness and heat number. Additional information like standard and copper nickel alloy numbers or even buyer's logo can be added on special request.

 

C70600 Copper Nickel Alloy Butt Weld Pipe Fittings Packaging :

All finished C70600 Copper Nickel Alloy Butt Weld Pipe Fittings are packed to suit the special conditions for international deliveries and can also customized as per customer's specific requirements.

 

Copper Nickel Alloy C 70600 Butt Welding Pipe Fittings Manufacturers

Documentation's & Test Certificate

We do provide Manufacturer Test Certificate as per EN 10204 / 3 or EN 10204 / 3.1B as per customers order specifications, Raw Materials Certificate, 100% Radiography Test Report etc.

 

C70600 Copper Nickel Alloy Butt Weld Pipe Fittings Industrial Applications :

 

  • Sea Water Industry
  • Marine and Ship Building Industry
  • Petroleum Refineries
  • Oil and gas production Industry.
  • Offshore Industries.

 

Countries where we can supply Copper Nickel Alloy C70600 Butt Weld Pipe Fittings

 

We Welcomes Distributors for Copper Nickel Alloy C70600 Butt Weld Pipe Fittings

 

Other Copper Nickel (70/30) Alloy C 70600 Products manufactured and supplied by us

Butt Weld Fittings | Threaded Fittings | Socket Weld Fittings | Flanges | Tubes | Round Bars | Instrumentations Tube Fitting |

 

Terms of Copper Nickel Alloy Butt Weld Fittings supply
Unless otherwise specified or agreed, all butt welding fittings are supplied seamless according to technical delivery condition DIN 86086. Seam welded butt welding are supplied in the as-welded condition.
End preparation
Square cut and de burred, alternatively: beveled as specified by the buyer while placing the order.

Note : Information provided on this web site about Copper nickel alloy C 70600 Butt Weld Pipe Fittings is for general information purposes only and subject to alteration without notice, we do not accept responsibility for errors or for information which is found to be misleading. Suggestions for or descriptions of the end use or application of products or methods of working are for information only and the company accept no liability in respect thereof.
Before ordering Copper Nickel Alloy Butt Welding Pipe Fittings supplied or manufactured by us, customers should satisfy themselves of their suitability.